The following describes the options available for mounting the IntelliVue MP2 patient monitor to a rail.
| Philips IntelliVue MP2/X2 10x25mm Rail Mounting Options |
|
 | The following describes the option available for mounting the Philips IntelliVue MP2/X2 Patient Monitor to a 10x25mm Rail.
IntelliVue MP2/X2: Pivot Arm Mounting Kit for 10x25mm Rails
GCX P/N: PH-0062-09 Kit Includes:
8" (20.3cm) M-Series Pivot Arm. Allows lateral positioning and tilt/swivel adjustments. Adapts to horizontal rails 8-10mm x 25-30mm Bracket positions power supply below monitor. M8040A #A01 Philips Mounting Plate sold seperately.
Installation Note |
| IntelliVue MP2: Wall / Pole / Rail Mount Kit |
|
 | GCX P/N: PH-0062-01 Kit Includes Bracket to mount power supply below MP2. PRCTM Post/Rail Clamp which clamps to posts .75" - 1.5" (19 to 35mm) diameter and horizontal rails 8 to 10mm x 25mm. Includes slide for mounting in GCX Channel. M8040A #A01 Philips Mounting Plate sold separately. 19" GCX Channel sold separately.
Installation Note
|
| IntelliVue MP2: Pole / Rail Mount Kit |
|
 | GCX P/N: PH-0062-02 Kit Includes: Two (2) PRCTM Post/Rail Clamps which clamp to posts .75" - 1.5" (19 to 35mm) diameter and horizontal rails 8 to 10mm x 25mm. MP2 Monitor and Power Supply are mounted seperately. M8040A #A01 Philips Mounting Plate sold separately.
Installation Note
Contact Information:
GCX Corporation
3875 Cypress Drive
Petaluma, CA 94954
More information URL: www.gcx.com/philips
Ph: 707.773.1100, 800.228.2555
Fax 707.773.1180 |